![]() Set the Rig Type selector to Kenwood TS-2000 Open the OmniRig Settings window and select the RIG 1 tab: Set the Baud selector to 115200, Word selector to 8, Parity selector to None, and the Stop selector to 1, set DTR to Off, and set RTS to Off. If you want Skimmer and the Panadapter to follow VFO B when in split, check Follow & Lead Alternate VFO when Split ![]() In the Secondary CAT Serial Port panel on Commander's Configuration window's Ports tab, The SDR hardware (receiver) can be connected to the transceiver's main antenna using a T/R relay and splitter as shown, connected to the transceiver’s “receive antenna loop” with a splitter, or could possibly use a separate “receive only” antenna.Ĭonfigure Commander's Secondary CAT Serial PortĮstablish a connected pair of virtual serial ports using VSP Manager, com0com or other virtual “null modem” these instructions assume that connected virtual ports N and N +1 are created (e.g. HDSDR controls the SDR hardware, displays a panadapter and converts audio received from the hardware via ExtIO.dll to I/Q (IF) audio for CW Skimmer. ![]() Configured in this way, CW Skimmer and HDSDR get frequency information from Commander's Secondary CAT Serial Port. This configuration provides simultaneous panadapter and CW Skimmer functionality for SDR hardware that connects to the transceiver's antenna using HDSDR and free (donationware) Virtual Audio Cables. Configuring HDSDR and CW Skimmer with a Transceiver and SDR Hardware
0 Comments
Leave a Reply. |